How To Fix Windows BOOTMGR Missing Problem

BOOTTMGR is missing Screen

Many times we have faced an error Message when trying to start Laptop or Desktop Computer. When The boot file in our hard disk (HDD) fail to run proper way and then the message "BOOTTMGR" is missing and "Press Ctrl+Alt+Del to restart." is shown. The error message displayed for few reasons:
1. When boot file is corrupt or missing.
2. If your HDD Connection loose or disconnect from Motherboard.
3. Sometimes, the error message appears if the bios battery and RAM connection loosed or disconnected.
4. If RAM or battery, ID cable connection point will Interrupted by fungus or dust, then these error message may appear on the screen.
So now let's see, how to fix the Error Message "Bootmgr is missing "Press Ctrl+Alt+Del to restart."

Step 1:

Open PC Side Cover (for laptop, you have to open the back cover☺). Then check and clean RAM, Bios battery, and HDD Cable and insert them again to their place very carefully. Beware about the loose connection.

HDD Cable

Step 2:

After cleaning and reinstall, start your PC and go to bios menu by pressing Del/F2/Esc. Then Find Boot option and select First boot device as CD Drive. Now press F10 and click ok.

Bios Screen

Step 3:

Now you will be seen Windows loading files, So wait few moment.

Windows Loading Files

Step 4:

After loading windows files you will be regarded a new window, here you have to need click Next.

Step 5:  

Click on the "Repair Your Computer."

Repair Windows

Setup 6:

To finish after step 6, can see a search window, wait a few minutes until seen installed windows with name and version. 

Step 7:

In System Recovery Options, you can see the name of operating system, location and partition size. You just have to click "Next" to proceed.

Step 8:

Now you can see a list of recovery tools. You can use two of them.

First, You can choose Startup Repair

Or,

You can choose "Command Prompt". If the first option can solve your problem then you have not to go for the second.

Step 9:

Then, startup repair will check your system for problems. It may take few minutes. Be patience. If problems are found, it will fix them automatically. Your computer might restart several times during this process. Maximum of the errors are fixed with this step.

Step 10:

If ,the "Startup Repair" fail to solve you problem. You can choose the Second Option- Command Prompt. There will be open a command prompt window when you hit the option.

Step 11:

Now, you have to write three commands one by one.

1. x:\Sources>bootrec /rebuildcd

"Please wait, since this may take a while..." message will be displayed. And after few moment you will see a line next after said- Successfully scanned windows installation. It shown the total number of windows installation)

Then write the next command:

2. x:\Sources>bootrec /fixmbr

Again "Please wait, since this may take a while..." message will be displayed. The last sentence will be as- The Operation Completed Successfully. Then write the 3rd and final code

3. x:\Sources>bootrec /fixboot

Again you will see "Please wait, since this may take a while..." message. The last sentence will be as- The Operation Completed Successfully.

Be careful, you must put a space before "/" on every code.

Final Step:

Now, type "exit" and hit enter to restart your machine. We hope, the error that create problem with your machine will gone. Enjoy your TechLife!

If you found any problem to follow our any of steps please feel free to knock us. We are always appreciate your valuable comments.

Read More

How to activate WinToFlash Professional Free For Lifetime

There is many way to create a bootable USB Media and you can find many topics to do this by searching google. But it's really difficult to crate a multi-bootable USB media/Pendrive. Novicorp WinToFlash is one of them which allow you to create multi bootable USB. But it's a paid tools and many of us could not afford this expenses. Some time ago we trying to show that.

How to create multi bootable Pendrive. And we use Novicorp WinToFlash to make multi bootable USB but few people request to give a easy solution to activate the software. So, today we are describing.

how to activate Novicorp WinToFlash Professional [The Bootable USB Creator] Free For Lifetime step by step. Please follow us very carefully.

Step 1: First of all, we hardly recommend you to make your PC's system date-08 Dec, 2015. And then download the desired Software. Novicorp WinToFlash Professional form their official site. or here. And then download activation file from here.

Step 2: Now extract or unzip the Novicorp WinToFlash which you downloaded as zip file and you have to setup it manually. After Unzip the file you can see the file and folders like below image.

Step 3: Press "Next" to proceed.

Step 4: Click on check box to agree the terms and condition of the user license agreement.

Step 5: Uncheck the "I agree to send statistical information" to avoid giving information in future.

Step 6: Now, as the "Next" enable so you can press it to continue.

Step 7:Now, press "Next" to quit the First Start Wizard and start working with software.

Step 8: Now, you can see the screen of the Novicorp WinToFlash Professional. If you check the Title bar the software, you will see that the software is unactivated. We have to make it activated to use like pro.

Step 9: First, click on "Help" menu and then click on "activate product" to activate the software with total features.

Step 10: After the 2nd click, there will be open again the first start wizard in a new window to welcome you. Do not hesitate to press the "next" button.

Step 11: Click again the "I accept EULA" check box and then press "Next".

Step 12: Now, you will find a  new window that contain box to provide the activation key file. Click on "Select" and locate the activation file which you download before the Step 01.

Step 13: After selecting the "Activation Key File" a validation message will appear below that confirm the validation of the file. Press "Next" to proceed.

Step 14: Now, click "Next" again to quit the First Start Wizard and start working with activated software.

Step 15: Check again the title bar of the software. Now, you will notice that there is showing only Novicorp WinToFlash Professional. That mean your software activated successfully!

Watch total process in our video tutorial:

So, now, you are ready to use the software and can make multi bootable USB anytime.

Read More

Popular 5 Seo Tools For Your Site

SEO is a most vital part for today's digital marketing. You need various tools while you optimized your site for search engines. Without SEO, you are unable to rank a better position in search engine and you lost your valuable visitors frequently. So, we are now discuss about 5 most popular SEO tools that could help you to better seo for your site.

MOZ:

This is a one of the best tool for search engine optimization with MozBar. The famous online marketing company Moz's free tool. Most SEO experts using this tool for doing their better.

When it comes to SEO a website is not enough to seen or analyzed your own situation but also analyze your competitors websites. With MozBar tool, you can easily analyze your competitors position. You can compare your website with them. Ranking for you to get an idea of ​​what to do. This tool allows you to see through the Authority and Page Authority, which helps a lot with your SEO. It is very easy to use as a newbie.

Yoast:

If you want to get quickly ranking in search engine with a small contest,  it's a simple solution for you to choose Yoast.

It's a simply best, and a free WordPress Plug in. If you are using WordPress as a CMS (Content Management System) for your website, then you can use this Plug in. So first you need to install Plug in-. It is very easy to use. It gives you the opportunity to select a keyword for each page. You can create your meta tags like a lot easier. Moreover, Yoast monitor your content, so you can better optimize your site. This tool is usually used for On Page Optimization. It's give you the best suggestion to doing better On Page Optimization and help you to arrange all your pages on your sites. If you do not understand at all On Page Optimization tool, it also help to wrote an article and to see how much you can work and make it suitable for Audience This tool will reveal the innermost thoughts of a site audience.

SEO Quake:

If you would like to see a website's meta tags or title you want to see any web site, img alt want to see, if you want to see how many have been using H1 tags should be used SEO quake in your browser. Who do SEO for a website that is neatly analysis tool that can help the SEO Quake. You can learn ranka the pages, websites rank, img alt, much valuable information on the number of indexed pages.

Very few people in the SEO work can be found in the lives of those who once did not use SEO Quake. It is a popular free tool.

This tool can be used only with the Mozilla Firefox browser. It's a perfect tool for Competitor Analysis.

Related Topic: How To Search Blog For Comment

SEMRush:

The first and most important thing to do for SEO is Keyword Research. This is a job for you if you make a mistake to select the right key word for your website, then the next step will be in vain. On-Page Optimization, Social Marketing, Competitor Analysis, Back link etc. are based on the keyword. So it's very important to research keyword carefully.

This is a great tool for keyword research and this is a paid tool. This tool helps you to know the organic search, paid search, phrase match keywords, related keywords of a keywords which you can easily find a profitable keyword. In addition, this tool can be seen by how difficult it is rank a keyword with Keyword Difficulty.

Aherfs:

Another popular tool for SEO is Ahrefs. It's basically a tool used for make and analyze a website's back links.

One of the most important elements in all the components of SEO is Backlink. Backlink is the most important thing after On-Page Optimization which rank a website better than others. You must have an idea about your competitors backling before create yours.

Ahrefs is very easy to use. This tool allows you to know your competitors Backlink number, and the number of your Backlinks. This tool also includes an alert system through any web site Backlinked with your site will notice you and also when you lose ones. As it is a paid tool and that's why you have to paid a $ 99 monthly charge for use this.

So, If you have a site or more then you can easily use these 5 SEO Tools for best ranking in search engine.

Read More

Enjoy Full Version Camtasia Studio Free For Life Time

 

How To Make Camtasia Studio 8.6.0 Full Version Life time for free?. That's what today we will tell our audience. Camtasia Studio is very useful and user friendly Software for Screen capture or video recording and basic video editing. Camtasia Studio is a paid software. They also offer a 30 days free trial before purchase. If you want to buy Camtasia Studio from their official site, you need pay $199 per year. Many of us can not afford to spend this amount of money.. This post for those who are unable to buy the expensive software. Now I am describing "How make Camtasia Studio 8.6.0 Full Version Free for Life long from a trial version.

Step 1: Please download The software from here- Camtasia Studio 8.6.0

Step 2: 
Press "Win Key" And "R" at a time. 

Step 3:
then can see a window like below.

Step 4:

Now Write in the open field "Drivers" And hit enter or Click "OK" Button. After clicking the "OK" Button you can see a new window as like below.

Now Find the named Folder "etc" and open the Folder by Double clicks.

 

Step 5:

Now find Named file "hosts" like below Image.

Step 6:

Now Click right button the file and click open. Here can see a new window.

Select notepad and click ok then can see a text file like below.

Now copy the below two lines and past the notepad as like image. Then save and close.

127.0.0.1# activation.cloud.techsmith.com
127.0.0.1 activation.cloud.techsmith.com

It's look like that:

Step 7:
Now, you have to go to "Start Menu" and type "Firewall" to find the Windows Firewall with Advance Security. See in pic:

Double click on it.

Step 8:
Find the "Outbound Rules" from the left menu and click on it to proceed next step.

Step 9:
Make a new rule by clicking on the "New Rule..."

Step 10:
After clicking on new rules there will come out a new window with some feature list. Just click the "Custom" radio button and then click "Next".

Step 11:
Select "All program" and press "Next" again.

Step 12:
Make Protocol type "Any" and press "Next" again.

Step 13:
In Scope Section, select "These IP address:" and then click "Add" to add

Step 14:
Click "The IP Address or Subnet:"and type "69.167.144.15" in the blank field, then press "OK".

Step 15:
Press "Next"

Step 16:

Click "Block the connection" radio button and press "next" to proceed to next step.

Step 17:
Now, check all tick mark to apply the rule over Domain, Private and Public Profile. Press "Next" to continue.   

Step 18:
Specify the name by "hostname: camtasiatudi.techsmith.com". You may left description blank as it is optional. Click "Finish" to complete the task.  

  

You will see the outbound rules as like as seen in the pic.

Final Step:
First of all, stop all kinds of internet connection from your PC/Laptop and Open the Camtasia Studio Trial Version and active by the given User Name and Serial Keys:

User Name: The Daily Help

Serial Key: 
1. 4CMYC-JKCM4-CVK5D-AGGHD-Z36D8

OR 
2. CCCHS-QCFCC-5CACK-DHH45-FCME2

Now, you can see a new dialog box, click "ok" and enjoy Camtasia Studio Full version for life long time.

Read More