How to fix USB Device Not Recognized

In many times we have faced a common problems that "USB Device Not recognized". It happens when your USB device is damaged or when the USB Controller is not installed properly. If your USB Device is Ok then here is the solution. I will describe that how to solved or fix this problems right now.

At first you have to press win-key+R ( which is mark on the above image with red boxes. then you can see a dialogue box will appear as like same below.

Now you have to type "Devmgmt.msc" as like shown the red box above. Then hit or click "OK". After that you will see the Device Manager window as like same below.

Here, Just Click The red Box marked“Universal Serial Bus controllers”. It willopen a drop down menu like that:

Click the Right Button on your mouse and go to USB Root Hub Properties. Then click Power management Tab as like below.

Now open Power management Tab. here you will see one check box which is already been clicked. You have to uncheck box by remove the check sign. So, Uncheck it and press the "OK" button.

Now we reached finishing line of the fixation. Well, the main work is done by pressing the "OK" button. You have to repeat the hole process for all the other USB  root Hub in “Universal Serial Bus controllers”.

Finally, after successfuly doing this process for the all USB Root Hub. You may never facing the problem again in your life, Hopefully.